Sharing The Disposable Plastic Tableware Quality Inspection

Disposable tableware has changed from the early foam lunch boxes to environmentally friendly tableware. The original foam lunch boxes was eliminated because it was not resistant to high temperature and the production process caused damage to the environment. Instead, plastic tableware, paper tableware, wooden tableware, degradable tableware and so on were used. Among them, plastic has the characteristics of low toxicity, high melting point, strong plasticity, simple production and low relative cost, so it has become the mainstream material for making disposable snack boxes.

There is no doubt that disposable tableware has become a widely used product in other service industries, such as take-out and so on. CQI Inspection has a customer who has cooperated for ten years. They purchase disposable tableware made of different materials from China, such as plastic tableware, pulp tableware, bamboo and wooden tableware and bagasse tableware. We found that even suppliers who have cooperated with them for a long time will have big or small problems in every inspection, such as irregular outer packaging, wrong quantity of products, wrong goods and so on.

Based on the recent quality inspection of disposable plastic tableware this article will introduce the key items and problems found by CQI Inspection in detail.

Remarks Of The Disposable Plastic Tableware Quality Inspection

Through the remarks in the report, it is not difficult to find that we found many problems in this inspection, mainly the first two points. Obviously, this is not a batch of qualified goods.

Product Defects Of The Disposable Plastic Tableware Quality Inspection

burrs on the lid

burrs on the lid Of Disposable Plastic Tableware Quality Inspection 2

burrs on the lid Of Disposable Plastic Tableware Quality Inspection 1

damaged on the lid

damaged on the lid Of Disposable Plastic Tableware Quality Inspection 1

damaged on the lid Of Disposable Plastic Tableware Quality Inspection 2

6% of the product have impurity or dirty mark

6% of the product have impurity or dirty mark Of Disposable Plastic Tableware Quality Inspection 2

6% of the product have impurity or dirty mark Of Disposable Plastic Tableware Quality Inspection 1

We found that there are not a few such defects, but a large part of them. Even though the suppliers will argue that such defects will not directly affect the use of products, it also shows that there are big problems in the production process and sanitary conditions of this batch of plastic tableware, which are not allowed.

Goods Stacking Of The Disposable Plastic Tableware Quality Inspection

the goods were stored orderly and the warehouse was relatively clean 2

the goods were stored orderly and the warehouse was relatively clean 1

AQL Of The Disposable Plastic Tableware Quality Inspection

According to the statistics of the product appearance and function inspection defect table in the above table, you will find that the defects found in the whole batch of goods are far higher than the specified value, which means that not only the individual styles in this batch of products have batch quality problems, but also the quality defects of other styles are far higher than the standard range.

We realize that this batch of products has a high proportion of dirt, which should never happen. No one wants to use dirty and unsterilized tableware, which has great hidden dangers.

Leaked Test Of The Disposable Plastic Tableware Quality Inspection

Of course, CQI also tested the function of the product. Unfortunately, CQI found that its leak test also failed.

Test Leakage Detail Of Disposable Plastic Tableware Quality Inspection

Test Leakage Of Disposable Plastic Tableware Quality Inspection

And this problem is the most frequent complaint on major e-commerce platforms. Consumers don’t want their backpacks to be polluted by thick soup, which will seriously affect the mood of the day!

Actually, the bad reviews of disposable plastic tableware faced by e-commerce are far more than that. Therefore, when CQI receives the customer’s inspection requirements, it will not only increase the customer’s specified requirements on the original inspection standards, but also look for and analyze more common bad reviews, and pay strict attention to such problems in the inspection.

To sum up the problems in this inspection, disposable tableware is not a particularly expensive product, but it is closely related to our life and even affects our safety and health. While it provides us with convenience, we should also pay attention to the hazards caused by quality problems. How to ensure the rights and interests of consumers well, so that we can not only avoid risks in time, but also effectively stop tracing the source when problems are found, thus reducing losses.

If you are interested in our inspection service and want to know more information, you can email our customer service email cqi@cqi5.com.cn, and we will help you!

CQI5 is committed to providing importers worldwide with product quality inspection services that far exceed those of our peers. If you are planning to import or have imported from China or Southeast Asian countries, please contact us cs’@’cqipro.com to learn more about how we can make your imports safer.

This article is an original article for CQI Inspection, who is committed to providing high-quality product inspection technology and know-how sharing for global importers and retailers to make imports safer.

For reprint, please contact with CQI Inspection, thank you.